ELECTRICALLY CONDUCTIVE ADHESIVES AND SEALANTS
Electrically conductive adhesives and sealants are used, among other things, in EMC shielding to electrically connect individual components or to seal joints, thereby reducing the penetration of electromagnetic interference.
While conductive adhesives form a solid, rigid bond and permanently hold components together, sealants, on the other hand, remain largely elastic.
Intended Use: Conductive adhesives and sealants – for reliable EMC shielding
A prerequisite for successful EMC shielding is that joints and gaps between housing components, covers, windows, or ventilation grilles are also properly sealed. Otherwise, radiation may escape, which in turn could impair the devices’ functionality.
Electrically conductive adhesives and sealants are used to effectively seal these weak spots.
Typical applications for electrically conductive adhesives and sealants include:
- Bonding shielded windows and ventilation grilles
- Attaching mesh gaskets made of knitted metal wire
- Sealing joints between metal plates
- Grounding and the dissipation of electrostatic charges for ESD protection
Screws need room for drilled holes and screw heads, while spring gaskets require sufficient installation space and contact pressure. Specialized adhesives and sealants can form thin bonds or seals tailored to the joint.
Electrically conductive adhesives and sealants are therefore primarily used in industries where installation space is limited or where complex geometries require a precise fit, as is the case, for example, in the aerospace, defense, automotive, and medical technology, as well as in telecommunications.
How do electrically conductive adhesives and sealants work?
Electrically conductive adhesives and sealants consist of an insulating plastic matrix that serves as an adhesive binder and is mixed with finely dispersed conductive particles.
In the cured plastic matrix, the conductive particles are so closely packed that continuous conductive pathways form between them. Electric current can flow through the cured adhesive or sealant via these paths. This requires a sufficient proportion of conductive particles: a continuous network only forms once a certain minimum quantity is reached. This point is referred to as the percolation threshold.
Depending on the product, curing takes place at room temperature or with the application of heat. Cure time depends on factors such as temperature, humidity, and layer thickness.
The electrical conductivity of the cured material and its other properties are largely determined by the binder used, as well as by the type, proportion, and distribution of the fillers:
- Binders: Epoxy resins form strong, rigid bonds, while silicones remain elastic and can withstand moisture and temperature fluctuations.
- Fillers: Silver offers particularly high electrical conductivity, while nickel can also shield against magnetic fields. A high filler content generally improves electrical conductivity but makes the material stiffer.
- One- or two-component systems: 1K products consist of a ready-to-use mixture, while 2K products require two separate components to be mixed before application.
One-component products are easy to apply, whereas two-component products require precise dosing and must be applied within their respective pot life.
Adhesives or Sealants: What’s the Difference?
Electrically conductive adhesives and sealants electrically bridge joints, thereby ensuring seamless EMC shielding. The two products differ primarily in their functionality. Adhesives create a strong, load-bearing bond, while sealants remain flexible and are better able to compensate for unevenness or movement.
The key differences at a glance:
| Electrically Conductive Adhesives | Electrically Conductive Sealants | |
|---|---|---|
| Main Function | Strong, load-bearing bond | Flexible Sealing |
| Mechanical Behavior | Usually hard and rigid | Permanently elastic or adhesive |
| Load capacity | Absorption of Mechanical Forces | Compensation for Movement, Vibration, and Tolerances |
| Typical Applications | Permanent Component Joint | Flexible Joint Sealing |
| Processing | Application over a large area or in specific spots | Apply as a paste or bead |
Adhesives cure on the joint surfaces to form a strong, permanent bond, while paste-like sealants remain elastic and can therefore compensate for movement or unevenness. Both are applied directly to the component.
For removable connections, however, the use of prefabricated elastomer, foam, or Pola gaskets has proven effective. Since electrically conductive gaskets are not permanently bonded to the mating surfaces, they can be removed again if necessary.
Strong, Load-Bearing Bonds: Electrically Conductive Adhesives for EMC Shielding
Electrically conductive adhesives are used when the joint needs to withstand mechanical loads and hold the components together structurally. Depending on the design, the adhesive can also replace soldered joints, for example, with temperature-sensitive materials or those that are difficult to solder. Thermally conductive variants additionally dissipate heat to a heat sink or the housing.
Parker Chomerics offers one- and two-component electrically conductive adhesives that cure at room temperature. CHO-BOND 584-29 and 584-208 are silver-filled epoxies. CHO-BOND 1030 is a one-component silicone adhesive with a silver-plated copper filler. Typical applications include permanently bonding and shielding air vents, windows, and mesh gaskets.
ELECTRICALLY CONDUCTIVE ADHESIVES
The strength and load-bearing capacity of the bond depend on the adhesive, the materials being joined, and how the surfaces are prepared. However, rigid adhesive joints can accommodate movement, vibration, and differences in thermal expansion only to a limited extent.
Elastic Joint Sealant: Electrically Conductive EMC Sealants
Electrically conductive sealants remain flexible and can accommodate movement, vibration, and differences in thermal expansion between components. Parker Chomerics’ one-component CHO-BOND 1035, 1038, and 1075 are silicone sealants filled with silver-plated glass, copper, and aluminum, respectively. CHO-BOND 2165 is a two-component polyurethane sealant with a copper filler. These sealants can conform to uneven mating surfaces and varying gap widths while helping keep moisture and dirt out of the joint.
EMC SEALANTS
Since electrical sealants, unlike adhesives, do not form a load-bearing bond, they are particularly suitable for housing joints and other interfaces that must be permanently sealed but may move or deform during operation.
Not sure which type of EMC shielding is right for your application? Contact us directly to learn more about us, our products, and our manufacturing processes.
Frequently Asked Questions About Our Electrically Conductive Adhesives
Below, we have compiled some of the most frequently asked questions about electrically conductive adhesives for you.
You can also find more information and interesting facts about EMC shielding, thermal management, and the elimination of interference using modern RF absorbers on our news blog.
What are electrically conductive adhesives used for?
Electrically conductive adhesives are used when components need to be permanently secured and, at the same time, electrically connected. Typical applications include bonding EMC windows, ventilation grilles, and mesh gaskets; grounding electronic components; and creating conductive connections within enclosures. Depending on the product, they can also replace soldered joints or dissipate heat.
What is the difference between electrically conductive adhesives and sealants?
Once cured, conductive adhesives form a strong bond capable of withstanding mechanical loads. Sealants, on the other hand, remain elastic and compensate for movement, vibrations, or differences in thermal expansion. They are primarily used to flexibly seal joints and often provide additional protection against moisture and dirt.
What materials can be bonded using electrically conductive adhesives?
Which materials can be bonded depends on the specific adhesive formulation and surface preparation. Conductive adhesives are often suitable for metals, ceramics, glass, and various plastics or composite materials. For material combinations, adhesion, thermal expansion, and potential galvanic corrosion should be checked in advance using the technical data sheet.
What level of electrical conductivity do conductive adhesives offer?
Electrical conductivity varies by product and is typically specified by the specific volume resistivity: The lower this value, the better the cured material conducts electricity. The type, proportion, and distribution of the fillers are particularly important. When making a selection, the manufacturer’s specifications should be compared under the intended curing and operating conditions.
Are electrically conductive adhesives also thermally conductive?
However, due to their fillers, some adhesives can simultaneously conduct heat and transfer it from the component to a heat sink or the housing. Nevertheless, not all electrically conductive adhesives are also thermally conductive.
What are the processing times for electrically conductive adhesives?
For ready-to-use 1K adhesives, the working time is primarily determined by the start of curing. For 2K adhesives, the pot life is also a factor: It begins when the two components are mixed and indicates how long the adhesive can be applied afterward.
Are bonds made with conductive adhesives reversible?
As a rule, conductive adhesive bonds are permanent and cannot be separated without causing damage. Separating them may damage the adhesive joint, surfaces, or components. For enclosures that need to be opened regularly, screw connections with prefabricated conductive gaskets are therefore more suitable. Whether an adhesive can be removed later, however, depends on the specific formulation and the substrate used.
Product inquiry
If you need more information or an offer on electrically conductive adhesives or sealants, simply fill out the contact form. We are also happy to send you product samples. We look forward to hearing from you and will get back to you as soon as possible!
For information about how we process your personal data, please see our Privacy Notice.
E. S. Electronic Service GmbH
Hohe Straße 3
61231 Bad Nauheim
Telefon: +49 (0) 6032 9636-0
Telefax: +49 (0) 6032 9636-49
E-Mail: info@electronic-service.de
E. S. Electronic Service GmbH
Hohe Straße 3
61231 Bad Nauheim
Phone: +49 (0) 6032 9636-0
Fax: +49 (0) 6032 9636-49
Email: info@electronic-service.de
The E.S. Electronic Service GmbH produces and markets customer-oriented solutions worldwide. In doing so, we concentrate our resources on electronic components, materials with a focus on EMI shielding, heat conduction, as well as noise filters and absorbers.


